pwalk-native: decompilation and native PC port of the Pokewalker firmware.
https://github.com/That-Kidd/pwalk-native

This download contains no Nintendo code or data. You need your own dump of
the Pokewalker ROM (48 KB, SHA-1 19a4c4fd64c7087b2eb62a3a30cfbb88d2a1f744)
and, optionally, an EEPROM dump (64 KB) from your walker.

Controls: Left/Right = side buttons, Down/Enter/Space = middle button,
W = toggle walking, R = toggle running, Esc = quit and save.
After a fresh start the screen stays off for about a minute, like the real
walker; then hold the middle button for half a second.

Unofficial fan project, not affiliated with or endorsed by Nintendo,
Game Freak, Creatures or The Pokemon Company.

Windows
-------
Windows 10 or later; nothing else to install.

Run pokewalker.exe. The first time, pick your ROM in the dialog (it is
copied to %APPDATA%\pokewalker). Then pick your EEPROM, or type a new
file name to start a blank walker. You can also drag an EEPROM file onto
the exe. Saves go to the EEPROM file and FILE.state next to it.
